Aetherstorm

Photo is for reference only. Color, veining, and shading vary between slabs. Visit our slabyard to select your material in person.

Aetherstorm

₱8,000 per sqm

Quarry: China
Surface Finish: Polished
Edges: Natural (Unpolished)
Thickness: 18 mm
Requires Sealing: No

Wine and cooking oil lift off the counter at the end of a long night with very little effort. Aetherstorm reads as a thin gray drift over warm off-white, and because the pattern repeats, a long run in a Cagayan de Oro kitchen looks like one unbroken surface.

QuarryChina
Surface FinishPolished
EdgesNatural (Unpolished)
Thickness18 mm
Requires SealingNo
Get a FREE Quote Today!See Other Quartz Designs

Available at all 5 branches. Custom-fabricated and installed in 3-5 days.

Get a Quote

Why Choose Aetherstorm

Stain-Resistant Made in a press rather than cut from a quarry, so a sealer is never needed and acid leaves no etch mark.
Quiet, Soft Veining A thin gray drift over warm white, giving the counter movement without letting it become the loudest thing in the room.
Consistent Appearance Slab after slab carries the same drawing, so a seam can be lined up and a long counter reads as one continuous plane.
Resists Chips and Scratches Wine, oil and coffee do not settle into engineered quartz, and the polish takes daily knife-and-pan traffic in its stride.

What Is Aetherstorm Quartz?

A hushed gray drift over warm white.

Aetherstorm is an engineered quartz whose thin gray veins run on the diagonal across a soft, warm off-white ground. Those veins are diffuse instead of sharply drawn, so a finished slab reads as movement rather than as pattern.

The name promises more theatre than the design supplies, which is worth knowing before you commit. Among the surfaces we carry this is one of the calmer ones, nearer a hazy overcast sky than anything stormy.

At ₱8,000 per square meter it belongs to our upper quartz band. What the money buys is restraint in the veining, which is a harder thing to manufacture convincingly than a loud pattern.

Pressed rather than quarried, the slab is about 93% crushed natural stone held together by roughly 7% resin. That build is what makes it stain-resistant, and it is why the surface never etches and never asks for a sealer.

How Much Does an Aetherstorm Countertop Cost in Cagayan de Oro?

Prices are subject to change without prior notice.

Item Starting Rates
Aetherstorm slab ₱8,000 per sqm
Fabrication ₱500 per lm
Installation ₱500 per lm
Sink or hob cut-outs ₱500 per set

Cut-out charges apply only where installation forms part of the job. Delivery is costed by the distance out from our Cagayan de Oro yard.

Get a FREE Quote Today!

How Do You Clean Aetherstorm Quartz?

Three habits, and a pale surface keeps its clarity.

1

Clean as You Go

Turmeric, coffee and frying oil rest on the slab instead of sinking in, so a soft cloth deals with almost any spill. Residue shows sooner on a pale ground than a dark one, which is reason enough to keep the habit.

2

Use Only Quartz Cleaner

Washing-up liquid leaves behind a film that flattens the polish across a few months. Reach instead for a pH-balanced quartz cleaner, which lifts residue and leaves the resin binder alone.

3

Never Scour It

Abrasive powders, scouring pads and steel wool scuff the polish for good. A plastic scraper lifts anything dried hard and leaves the surface unmarked.

The Cagayan de Oro branch stocks specially-formulated stone care products, so nobody has to guess in a supermarket aisle.

How Do You Care for Aetherstorm Quartz?

No sealing required, which leaves three rules.

1

Always Use Trivets

The resin holding the slab together is heat-sensitive, so a pan carried straight from the burner scorches or discolors it for good, and the mark cannot be polished out. This is the commonest way a quartz counter is ruined, and no workmanship warranty covers it.

2

Keep It Out of Direct Sun

Sustained UV yellows engineered quartz, and nothing reverses it. Hang blinds where a counter catches the afternoon, and keep every quartz installation indoors.

3

Skip Harsh Chemicals

Oven cleaner, bleach and other high-pH products degrade the resin as the years pass. Wax is no better, since it builds into a layer that yellows against so pale a ground.

Is Aetherstorm Quartz Good for Kitchen Countertops?

A pale counter that resists staining.

Yes. Neither etching nor staining troubles engineered quartz, so vinegar, wine, calamansi and red sauce wipe off instead of leaving a mark behind. On a pale slab that counts for more than it would on a dark one, because a stain on white has nowhere to hide.

Hardness is on your side too. Quartz sits near 7 on the Mohs scale where marble sits at 3, so it shrugs off the scratching that leaves soft natural stone looking tired after a few years of cooking.

The veining does quiet work from day to day. It is far too fine to disguise crumbs the way a busy drawing would, yet it breaks up water marks and stops the surface reading as dead flat.

Seams deserve thought. A busy pattern swallows a join because the eye is already travelling, whereas fine veining on a near-plain ground gives it nowhere to hide, so settle seam placement with the fabricator before templating.

Heat is the one real limit, and it applies in any Cagayan de Oro kitchen. A pan lifted off a live burner scorches the resin, the damage will not polish out, and trivets are therefore not optional on quartz of any kind.

Does Aetherstorm Quartz Need Sealing?

Nothing to seal — engineered quartz is manufactured rather than quarried.

No. A sealer works by filling the pore structure of a quarried stone so that liquid cannot travel through it. On engineered quartz it achieves nothing at all, and a few formulations attack the resin.

Set it against a natural stone in the same visual register and the gap is stark. White marble of this coloring wants sealing whenever the water test says so, dulls where calamansi lands and marks where a glass has stood. Aetherstorm does none of it.

Anyone offering to sell you a sealer for a quartz counter has either misunderstood the material or is selling something you have no use for. Cleaning is the entire maintenance routine.

Aetherstorm vs Our Other White Quartz

Four designs level at ₱8,000 in Cagayan de Oro, so the question is how loud the veining is.

Aetherstorm is the softest veining

Thin gray veins drifting over warm white at ₱8,000 per sqm. Pick it when you want movement that turns up on the second look rather than the first. If you would rather have white with no veining in it at all, Cloudstone at ₱5,900, Moonstone at ₱5,700 and White Sapphire at ₱5,200 all sit below this band.

Cirrus Calacatta is plainer still

Cirrus Calacatta goes quieter again, near enough a plain white slab with only the faintest movement across it. The rate is the same. Take it if even soft veining feels like one thing too many.

Lightning Calacatta is the balanced one

Lightning Calacatta holds clearly drawn veining at the same ₱8,000. That is the one to choose when the counter should be legible from the far side of the room.

Nero Calacatta is the boldest

Nero Calacatta throws charcoal veining over white for the strongest contrast in this family. Level on price once more, and a completely different order of drama.

What Colors Go With Aetherstorm Quartz?

Neutral veining leaves the rest of the room open.

Gray veining over warm white is about the most forgiving surface there is to build a kitchen around, since it commits outright to neither a warm nor a cool direction.

White and pale gray cabinetry deliver the cleanest outcome. The counter then reads as a continuation of the cabinetry instead of a feature, which suits a room where something else is meant to catch the eye.

Timber holds up provided you keep it light. Ash and oak pick up the warmth already in the ground, while darker walnut leaves the slab looking washed out rather than soft.

Chrome, brushed nickel and matte black all suit it for hardware. Brass is the one to weigh carefully, because it drags the warm undertone forward and shifts the surface warmer than it looked when you saw it in Cagayan de Oro.

Frequently Asked Questions

Is Aetherstorm real stone?
No, not the way a quarried slab is. This is engineered quartz, about 93% crushed natural stone held by roughly 7% resin. Quartz is a natural mineral, but the slab comes out of a press rather than a quarry, which is why it never etches and never needs a sealer.

Is Aetherstorm as dramatic as the name suggests?
No. The veins are fine, gray and diffuse over a warm white ground, and the effect is soft rather than stormy. It is among the quieter designs we carry, so see a full slab if you had something bolder in mind.

Can you put a hot pan on Aetherstorm quartz?
No. Direct heat scorches the resin binding the slab and the mark will not polish out. Anything off a burner or out of an oven goes on a trivet. No workmanship warranty covers heat damage.

Does Aetherstorm quartz stain?
It resists staining rather than being immune to it. Spills rest on top of the surface rather than travelling into it. Wiping them up reasonably soon is still worth doing, though on a pale slab that is about appearance rather than protection.

Does the veining repeat between slabs?
Yes. Manufacturing keeps the drawing consistent slab to slab, so a seam can be lined up and a long run reads as continuous. Ask to see the slabs set aside for your job before fabrication begins.

What thickness and finish does Aetherstorm come in?
Slabs arrive 18 mm and polished, with natural unpolished edges as supplied. Whatever edge profile you want gets shaped during fabrication; it is not something the slab turns up with.

Can Aetherstorm quartz be used outdoors?
No. Sustained UV discolors engineered quartz permanently, so its place is indoors. For a lanai or an outdoor counter, granite is the material that holds its color in direct sun.

Where can you buy Aetherstorm quartz in Cagayan de Oro?
Stone Depot supplies Aetherstorm quartz from its yard in Cagayan de Oro, alongside the rest of our engineered quartz range.

Soft veining rewards a full-size viewing, because a sample tile seldom carries enough of the drift to show how a whole counter will look. The branch is open Monday to Saturday, 8 AM to 5 PM, and you are welcome to drop in or get in touch.

Send Your Plan and Get an Estimate Within 24 Hours

Free and no obligation. Or drop by any of our branches and we will provide you a quotation on the spot.

Get a FREE Quote Today!
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Aetherstorm”

Your email address will not be published. Required fields are marked *

Scroll to Top